Washable hood

Washable hood

Open-face hood, covering head, neck, shoulders and chest.

With elastic around the face and in the neck.

Product Description

  • Reusable hood
  • Class I non-sterile medical device
  • suitable for daily use in the healthcare sector
  • Water resistant and breathable
  • 30 washes at 95 ° C guaranteed

Technical specifications

  • Composition (UNE EN ISO 1833: 2011)
    Fabric: Polyester 100% / Base: Polyurethane 100%
  • Structure
    Technical fabric made of two inseparable layers: a textile layer and a membrane.
    Fabric: Knitted interlock 100% polyester 65 g/m2.
    Base: Water resistant and breathable membrane 100% polyurethane.
  • Total weight
    95 g/m2: 65 g polyester and 30 g polyurethane.
  • Finish
    Optical white fabric with Hot Melt lamination on water resistant and breathable membrane.
  • Characteristics
    • Dimensional stability (Washed at 95 ° C): Impact -1%. Warp -2%.
      UNE EN ISO 5077: 2008
    • Water resistance: >500 cm/H2O
      UNE EN ISO 20811:1993
    • Breathability: >150 g/m2 · 24h
      BS 7209:1990
  • Ready-to-wear
    • Overlock elastic safety stitch
    • With elastic around the face and in the neck

Instructions for proper washing

This product should be washed before first use and after each use. Respect the following instructions:

Prewash: 8 minutes 40 ° C. Neutral soap without bleach. Rinse with cold water for 2 minutes.
Washing: 12 minutes 90 ° C. Neutral soap without bleach. 1st rinse 40 ° C for 5 minutes. 2nd rinse cold water for 5 minutes.
Drying: Maximum 80 ° C in the dryer. Can be dried in the sun. Do not iron.
Do not dry clean with solvents.
DO NOT USE ANY CHEMICAL ONLY NEUTRAL SOAP.
DO NOT USE ACIDS OR ALKALI (CHLORINE, HYDROGEN PEROXIDE, NaOH): THESE WILL DESTROY THE MEMBRANE.

Certifications

Meets the requirements of standard 13795-1: 2020: Microbial cleaning / biological charge, liquid penetration, microbial penetration, particle release, tensile strength or breaking strength and water resistant.

Product with textile quality certification OEKO-TEX ® ‘Class I’; OEKO-TEX ‘Class II’; 2018OK1127 AITEX / 2002AN4162 AITEX
Company certified under ISO 9001: 2015
Member of SEDEX and controlled under SMETA protocol ZC1058900

Extra information

One size
Colour: White