Washable medical gownDanny2020-10-28T13:17:52+00:00
Washable medical gown
Washable medical gown
Ribbon at the back of the neck, adjustable
Crossed back closure, internally adjustable
Universal side strap, adjustable
Long sleeves with adjustable elastic cuffs
Reusable medical gown
Class I non-sterile medical device
suitable for daily use in the healthcare sector
Water resistant and breathable
30 washes at 95 ° C guaranteed
Composition (UNE EN ISO 1833: 2011) Fabric: Polyester 100% / Base: Polyurethane 100%
Technical fabric made of two inseparable layers: a textile layer and a membrane. Fabric: Knitted interlock 100% polyester 65 g/m2. Base: Water resistant and breathable membrane 100% polyurethane.
Total weight 95 g/m2: 65 g polyester and 30 g polyurethane.
Finish Optical white fabric with Hot Melt lamination on water resistant and breathable membrane.
Dimensional stability (Washed at 95 ° C): Impact -1%. Warp -2%.
UNE EN ISO 5077: 2008
Water resistance: >500 cm/H2O
UNE EN ISO 20811:1993
Breathability: >150 g/m2 · 24h
Overlock elastic safety stitch.
Six stitched straps to close the gown.
With elastic cuffs.
Instructions for proper washing
This product should be washed before first use and after each use. Respect the following instructions:
Prewash: 8 minutes 40 ° C. Neutral soap without bleach. Rinse with cold water for 2 minutes. Washing: 12 minutes 90 ° C. Neutral soap without bleach. 1st rinse 40 ° C for 5 minutes. 2nd rinse cold water for 5 minutes. Drying: Maximum 80 ° C in the dryer. Can be dried in the sun. Do not iron.
Do not dry clean with solvents.
DO NOT USE ANY CHEMICAL ONLY NEUTRAL SOAP.
DO NOT USE ACIDS OR ALKALI (CHLORINE, HYDROGEN PEROXIDE, NaOH): THESE WILL DESTROY THE MEMBRANE.
Meets the requirements of standard 13795-1: 2020: Microbial cleaning / biological charge, liquid penetration, microbial penetration, particle release, tensile strength or breaking strength and water resistant.
Product with textile quality certification OEKO-TEX ® ‘Class I’; OEKO-TEX ‘Class II’; 2018OK1127 AITEX / 2002AN4162 AITEX
Company certified under ISO 9001: 2015
Member of SEDEX and controlled under SMETA protocol ZC1058900